DESCRIPTION


The PH-115 is a trapezoidal, full range two way loudspeaker designed for use in mobile speech and music sound reinforcement applications as well as in a wide range of fixed installations.The loudspeaker complement consists of a front loaded 15″low-mid frequency driver and a 2″high frequency compression driver on a 80°H x 50°V HF waveguide, matched with an internal passive crossover network. The relatively short flare allows physical alignment of the HF and LF devices, and ensures that the wavefront is shaped smoothly, eliminating reflections in the throat area while giving excellent pattern control. The quasi-trapezoidal enclosure has been designed with a 15°side angle on one side, and with a 15°and 45°angle on the other. This shape allows the loudspeaker to be used for either front of house applications or as a floor monitor.The PH-115 includes the provision for fitting optional ring-type fittings, enabling it to be suspended and angled in permanent installations as well as in mobile applications. A pole mount socket is fitted for use with 35mm poles and speaker stands. The cabinet is constructed from 18mmbirch plywood, screwed and glued together for maximum strength and rigidity, and includes a reticulated foam and steel mesh grille. It is finished in durable semi-matt black textured environmental friendlypaint. A rear panel connector plate carries two Neutrik Speakon NL4MP connectors for loop in and loop out connections to additional enclosures.

 

  FEATURES
  1. Quasi-trapezoidal cabinet
  2. Wide dispersion
  3. Full range response
  4. Flying tracks
  5. Pole mount socket

 

APPLICATIONS

  1. FOH or Monitor
  2. for small sound system
  3. Theater effects system
  4. Conference Hall and AV activities
  5. Multifunction Hall
  6. Club and Disco

 

  • FREQUENCY RESPONSE : 60Hz~ 20KHz(±4dB)/ 40Hz~ 22.5KHz(-10dB)
  • SENSITIVITY (1W/1m) : 98dB(220Hz~ 22KHz)
  • NOMINAL IMPEDANCE : 8 Ohm
  • POWER RATING : 450W(AES)
  • CROSSOVER FREQUENCY : 3KHz
  • LF COMPONENTS : 1 x 15″woofer(3″voice coil)
  • HF COMPONENTS : 1 x 1″exit compression driver(2″voice coil)
  • NOMINAL COVERAGE : 80°(H) x 50°(V)
  • CALCULATED OUTPUT (MAX) : 124.5dB SPL, 130.5dB SPL peak
  • DIMENSIONS (HxWxD) : 720 x 472 x 385(mm)
  • NET WEIGHTS : 27(kg)
  • CONNECTORS : 2 NeutrikNL4MP connectors
  • SUSPENSION HARDWARE : Flying tracks (rear,bottom,top)

 

 

 

 

 

Chick here for technical note PH-115