DESCRIPTION


The W-218B is a manifolded, vented-box subwoofer designed for use with wave series enclosures.The loudspeaker complement consists of two custom-designed 4" voice coil, double suspension 18" drivers, The two woofers face each other in a manifold chamber at the center of the enclosure, resulting in increased low frequency efficiency (at slightly above boxtuning) and reduced distortion compared to conventional direct-radiating designs. High driving strength is provided by a massive, precision crafted magnetic assembly. Four steel handles are provided for easy lifting and carrying and four rubber feet are fitted to the bottom of the cabinet.The enclosure is constructed from 3/4" (18mm) birch plywood, screwed and glued together for maximum strength and rigidity, and includes a reticulated foam and steel mesh grille. It is finished in black semi-matt textured environmental freindly paint. A rear panel connector plate carries two Neutrik Speakon NL4MP for loop in and loop out connections to additional enclosures.

 

 
  FEATURES
  1. 2*18" Subwoofer-
  2. Extended LF response-
  3. Very high power handling-

 

APPLICATIONS

  1. Subwoofer for large sound system-
  2. Large Disco-
  3. Touring-
  4. Arena and Stadium-
  5. Large theater-

 

  • FREQUENCY RESPONSE : 40Hz~ 170Hz(±3dB)/ 30Hz~ 200Hz(-10dB)
  • SENSITIVITY (1W/1m) : 104dB SPL(40Hz~ 150Hz)
  • NOMINAL IMPEDANCE : 4 Ohm
  • POWER RATING : 1200W(AES)
  • LF COMPONENTS : 2 x 18″manifolded(4″voice coil)
  • CALCULATED OUTPUT (MAX) : 135dB SPL, 141dB SPL peak
  • DIMENSIONS (HxWxD) : 916 x 620 x 750(mm)
  • NET WEIGHTS : 91(kg)
  • CONNECTORS : 2 NeutrikNL4MP connectors
  • SUSPENSION HARDWARE : Flying hardware set (side)
 

 

 

 

 

 

Chick here for technical note W-218B