The W-3F loudspeaker is a mid to high range loudspeaker which uses a coaxial aligned of two constant directivity horns. Two passively coupled drivers are used a 12″low frequency cone driver with a 3″voice coil, and a 2″exit compression driver with a 3″voice coil and titanium diaphragm. The i-45°x 45°dispersion. Two steel handles are provided for easy lifting and carrying and four rubber feet are fitted to the bottom of the cabinet, The enclosure is constructed with 3/4″(18mm) birch ply-wood, screwed and glued together for maximum strength and rigidity, and includes a reticulated foam and steel mesh grille. It is finished in black semi-matt textured environmental freindly paint. A rear panel connector plate carries two Neutrik Speakon NL4MP for loop in and loop out connections to additional enclosures.





  1. Trapezoidal cabinet-
  2. Narrow dispersion-
  3. High SPL-
  4. Flyingtracks



  1. FOH for large sound system-
  2. Large Disco-
  3. Touring-
  4. Arena and Stadium-
  5. Large theater-


  • FREQUENCY RESPONSE : 170Hz~ 19KHz(±3dB)/ 132Hz~ 21KHz(-10dB)
  • SENSITIVITY (1W/1m) : HF: 110dB SPL(1.5KHz~ 20KHz),LF: 103dB SPL(170Hz~ 1.5KHz)
  • POWER RATING : HF: 150W(AES)/LF: 400W(AES)
  • LF COMPONENTS : 1 x 12″horn-loaded(3″voice coil)
  • HF COMPONENTS : 1 x 2″exit compression driver(3″voice coil)
  • NOMINAL COVERAGE : 45°(H) x 45°(V)
  • CALCULATED OUTPUT (MAX) : HF: 132dB SPL, 138dB SPL peak,LF: 131dB SPL, 137dB SPL peak
  • DIMENSIONS (HxWxD) : 540 x 580 x 550(mm)
  • NET WEIGHTS : 45(kg)
  • CONNECTORS : 2 NeutrikNL4MP connectors
  • SUSPENSION HARDWARE : Flying tricks (front) , Flying hardware set (rear)






Chick here for technical note W-3F