The W-6Fis a full range 3-way loudspeaker for Tri-amping. MF section used a 10" mid frequency cone driver with a 3" voice coil, and HF section used a 2" exit compression driver with a 3" voice coil and titanium diaphragm; LF section used a 15" low frequency cone driver with a 4"voice coil, all horn loaded. 60°x 40°dispersion. Four steel handles are provided for easy lifting and carrying and four rubber feet are fitted to the bottom of the cabinet, and four heavy dutywheels. The enclosure is constructed with 3/4 (18mm) birch plywood, screwed and glued together for maximum strength and rigidity, and includes a reticulated foam and steel mesh grille. It is finished in black semi-matt textured environmental friendly paint. A rear panel connector plate carries two Neutrik Speakon NL8MP for loop in and loop out connections to additional enclosures.





  1. Trapezoidal cabinet-
  2. Narrow dispersion-
  3. High SPL-
  4. Flyingtracks-
  5. Heavy dutywheels-



  1. FOH for large sound system -
  2. Large Disco-
  3. Touring-
  4. Arena and Stadium-
  5. Large theater-


  • FREQUENCY RESPONSE : 80Hz~ 20KHz(±3dB)/ 60Hz~ 22KHz(-10dB)
  • SENSITIVITY (1W/1m) : HF: 108dB SPL(2KHz~ 20KHz) , MF: 105dB SPL(250Hz~ 2KHz) ,
    LF: 99dB SPL(78Hz~ 250Hz)
  • NOMINAL IMPEDANCE : HF: 8 Ohm/HF: 8 Ohm/LF: 8 Ohm
  • POWER RATING : HF: 150W/MF: 400W/LF: 600W
  • LF COMPONENTS : 1 x 15″horn-loaded(4″voice coil)
  • MF COMPONENTS : 1 x 10″horn-loaded(3″voice coil)
  • HF COMPONENTS : 1 x 2″exit compression driver(3″voice coil)
  • NOMINAL COVERAGE : 60°(H) x 40°(V)
  • CALCULATED OUTPUT (MAX) : HF: 130dB SPL, 136dB SPL peak, MF: 131dB SPL, 137dB SPL peak , LF: 127dB SPL, 133dB SPL peak
  • DIMENSIONS (HxWxD) : 900 x 580 x 650(mm)
  • NET WEIGHTS : 81(kg)
  • CONNECTORS : 2 NeutrikNL8MP connectors
  • SUSPENSION HARDWARE : Flying tracks (front) , Flying hardware set (rear)






Chick here for technical note W-6F